Sd.Kfz.222, Sd.Kfz.223 MG Werkzeug
We are working on creating a suspension damper for a separate project. A pattern has been made and two castings produced. All of the internals…
We are working on creating a suspension damper for a separate project. A pattern has been made and two castings produced. All of the internals…
Jagdpanther 411 returned from Tankfest at the Tank Museum on Monday. She was driven in to her normal storage area inside the Workshop. The relevant…
Off to Bovington This week has been taken up with Jagdpanther 411 preparations for Tankfest. The gas mask holders have been installed and general vehicle…
Getting Ready for Tankfest! This week we received the latest batch of Renault FT castings from the foundry. These will require machining in the very…
The Renault FT hull has been stripped completely. The large panels have been sent to the sand blasting and two pack primer. We have kept…
Dismantling the FT Biggest task this week was dismantling the Renault FT to be sent off for sandblasting and priming. Each section was removed and…
This week we have continued mapping the interior of the Sd.Kfz.223 given the three sources of information available to us – research from Fort Benning,…
Holders & Containers More work was carried out on Jagdpanther 411 this week. The gas mask holders have been made to exact specifications, with the…
Working on the Jagdpanther In preparation for Tankfest, we have started work on Jagdpanther 411. This week we removed several road wheels to enable access…
Planning This week we have been concentrating on the project plan for the Renault FT and TSF. We have spent many hours going through our…
Research Progress on the interior of the 4 Serie Sdkfz 222 took a favourable turn. Drawings for the Renault FT and TSF Turret Ring and…
Have a good Easter! Drawings are being finalised for the final machining on castings for the suspension of the Renault FT and TSF. A break…
This week we continued to machine parts for the Renault TSF suspension. We went on a component collection trip to Prague. We were visited by…
We located a particularly rare technical handbook for batteries of the First World War and post War period. We now have dimensions and external characteristics…
This week saw a large leap forward in our understanding of the interior of the Renault TSF turret – notably the battery boxes and their…
This week research continued into the interior layout of the Blockhaus for the Renault TSF, using original documents and archive items. The picture is slowly nearing…
Despite Storm Doris, work has been continuing in the Workshop. The casting for the Renault FT gear change is now ready. We have also acquired…
This week saw the chains, shackles and pins finished for the Renault FT and TSF. The next phase of fabrication started for the remaining fuel…
Lots of detail work going on in the workshop this week. We have been making towing pins for the Renault FT. The images show a…
Our engineers have been busy this week producing several internal parts for the Renault FT. An example of the level of detail required for this…
This week our engineers have been making various small parts for the Renault FT 17 turret interior, cabin and exterior. Items produced are the curettes…